Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Commerce City, CO
If your chimney is pulling badly, smoking into the room, or showing cracked masonry after a hard wind, chimney repair in Commerce City starts with a look at the flue and the parts that take the weather. This city sits in the South Platte valley downwind of the front-range wind corridor, so a cap that would last a decade in a sheltered Denver neighborhood can be stripped or loosened here by gusts off the open plains. Our technicians have up to 9 years of experience, we name the brands we install, and we quote the work before we start. Call (855) 360-7080 for a free estimate. We answer 24/7.
Why Commerce City Homes Are Different
Commerce City is two housing stories in one place, and chimney work follows the split.
In the original Derby and Rose Hill core around ZIP 80022, plenty of the housing went up in the post-war years. Those masonry flues have had decades of heating cycles, and the freeze-thaw swings that come with high-desert front-range winters work on mortar joints and crowns a little more every season. What a sweep finds in a 1950s Derby chimney is usually a clay tile liner with cracked or spalled sections, or a crown that has pulled away from the stack and is letting water in.
Out in Reunion and Buckley Ranch, the story flips. The newer 2000s and 2010s tract homes have factory-built metal chimneys, and those flues tend to be structurally sound. Their weak points are the top and the joints: caps, chase covers, and the seams where sections meet. The strong northerly and downslope wind events that roll off the open ground east of the city push wind-driven debris into flues and create downdraft problems that homeowners in more sheltered parts of the metro rarely deal with.
That’s why the inspection schedule here is driven more by wind-blown accumulation and cap condition than by how much wood a household burns. A cap check after a big wind event is genuinely useful in Commerce City, and it’s the kind of thing a foothill town to the west wouldn’t think twice about.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Commerce City Services
Most calls we take in Commerce City come down to two jobs: getting the flue cleaned and inspected, and fixing the parts the wind and the years have damaged.
Chimney Sweep in Commerce City
A sweep here is a full look at the system, not just a brush down the flue. We run a camera up the flue, check the cap and spark arrestor for the kind of wind damage this valley produces, and look at the crown and flashing while we’re on the roof. You get a photo report of what we found, so the conversation about repairs is based on evidence you can see. If you’ve recently bought an older Derby home or skipped a few years of maintenance, this is the place to start. Book a chimney sweep and we’ll tell you plainly what needs doing now and what can safely wait.
Dryer Vent Cleaning in Commerce City
Lint buildup in a dryer vent is one of the leading household fire hazards, and most chimney-only companies won’t touch it. We do. In Commerce City’s newer tract homes, long vent runs through interior walls and tight exterior terminations are common, and both make lint accumulate faster than a short straight run would. We clear the full length of the vent, check the termination flap, and confirm airflow is where it should be. It’s a straightforward job that takes a load off your mind and off your dryer. See our dryer vent cleaning page for what the visit covers.
Chimney Repair in Commerce City
Chimney repair in Commerce City has to answer for two very different kinds of flue, and the wind that shapes both of them. In the post-war masonry stock around Derby and Rose Hill, decades of freeze-thaw cycling show up as cracked clay tiles, crumbling mortar and crowns that have pulled loose; out in Reunion and Buckley Ranch, the metal chimneys are newer but their caps and joints take a beating from gusts rolling off the plains. We handle the whole flue, from a cap that needs reseating to a liner that needs rebuilding, and we install professional-grade materials from HeatShield, Gelco, Olympia Chimney and Famco rather than hardware-store substitutes. You’ll see the defect on camera before anyone recommends a fix. For the full range of what we take on, see our Chimney Repair page.
Chimney Cap Installation
Signs you need it
You need a cap installed if the flue is open to the sky, birds and squirrels are getting in, or rain and wind-driven debris are landing on the smoke shelf.
What it costs in Commerce City
Cap installation typically runs $150 – $400, and the written estimate sets the final price.
How we do it
We measure the flue opening, fit a cap sized to the stack, and fasten it so the wind off the plains can’t walk it loose.
Chimney Cap Replacement
Signs you need it
Replacement is the answer when the cap is bent, tilted, missing mesh, or sitting loose after a big wind event, which is common on Commerce City stacks.
What it costs in Commerce City
Cap replacement is typically $175 – $450 depending on the cap type and how much of the old mounting has to be cut away, with the final price set by the written estimate.
How we do it
We remove the damaged cap and its fasteners, inspect the flue top for damage the old cap was hiding, then install and anchor a new cap rated for wind exposure.
Chimney Liner Installation
Signs you need it
A cracked, spalled, or missing clay liner, or a metal flue with failed joints, means the flue can’t safely contain heat and flue gases.
What it costs in Commerce City
Liner installation typically falls between $2,200 and $5,500 depending on flue height and liner type, and the written estimate sets the final price.
How we do it
We size the liner to the appliance, insulate it where required, and install a DuraFlex flexible stainless system down the full length of the flue, connecting it at the top and the appliance collar.
Chimney Flashing Repair
Signs you need it
You’ll see flashing repair needs as water staining on the ceiling near the chimney, rusted or lifted flashing, or caulk that has failed at the roof line.
What it costs in Commerce City
Flashing repair typically runs $250 – $750, and the written estimate sets the final price.
How we do it
We lift and reset the flashing, replace any rusted sections, and seal the seams so meltwater and driven rain run away from the stack instead of into it.
What Chimney Repair Costs in Commerce City
| Item | Typical range in Commerce City |
|---|---|
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $175 – $450 |
| Chimney flashing repair | $250 – $750 |
| Chimney liner installation | $2,200 – $5,500 |
Do I really need a new liner, or can it be repaired?
Sometimes it can be repaired. HeatShield resurfacing can restore a liner with cracks and gaps in some cases, which is less invasive and less expensive than a full reline. We only recommend it when the camera shows the existing liner is sound enough to hold the resurfacing, and we show you the footage first.
Will a wind-damaged cap fix my downdraft problem?
Often, yes. A loose or missing cap lets wind drive straight down the flue, and reseating or replacing it restores the protection. If the camera shows the flue itself is compromised, we’ll tell you that too rather than stopping at the cap. Call (855) 360-7080 for an exact quote, and estimates are free.
Brands We Service in Commerce City
We work with a curated roster of professional-grade brands, including HeatShield for liner resurfacing, Gelco and Olympia Chimney for caps and components, and Famco for venting. We name the brands we install because you deserve to know what’s going into your home. If a part needs ordering, we’ll tell you the turnaround when we quote. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Commerce City, CO
| Service | Typical range in Commerce City |
|---|---|
| Chimney sweep and inspection | $150 – $350 |
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $175 – $450 |
| Chimney flashing repair | $250 – $750 |
| Chimney crown repair | $300 – $900 |
| Chimney liner installation | $2,200 – $5,500 |
| HeatShield liner resurfacing | $1,100 – $2,800 |
| Dryer vent cleaning | $125 – $275 |
Price in Commerce City climbs with flue height, roof access, and how much wind or freeze-thaw damage we find once we’re up there. A masonry stack that needs crown and flashing work together costs more than a metal chimney with a bent cap. Whatever the camera shows, you get the number in writing before any work starts, and that written estimate sets the final price.
Neighborhoods We Serve in Commerce City
We work across the whole city, from the older blocks in the Derby and Rose Hill core to the newer streets in Reunion and Buckley Ranch. Book a visit and we’ll confirm a dispatch window, Sunday through Friday, 7am to 7pm. A call outside those hours is booked into the next opening.
- Derby
- Rose Hill
- Reunion
- Buckley Ranch
Service Area – Cities Near Commerce City
Commerce City sits close to a lot of the north metro, and we take calls from the towns just over the line. If you’re in Thornton, CO, Berkley, CO, Westminster, CO or Arvada, CO, the same wind and freeze-thaw conditions shape your chimney work, and we’re glad to book a visit. See the Chimney Sweep Longmont page for the main service area.
Serving Commerce City, CO – Our Local Coverage Area
We serve Commerce City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Commerce City
Yes. We work across the full city, from the older Derby and Rose Hill blocks to Reunion and Buckley Ranch. When you call, we’ll confirm your address is in range and book a dispatch window, Sunday through Friday, 7am to 7pm.
It depends on the scope. A cap or flashing repair generally doesn’t need one, while a full reline or structural masonry work often does. We’ll tell you what your job requires and point you to the city building department so you can confirm before work starts.
Usually, yes. We sweep and camera-inspect the flue first, and if the footage shows a defective cap, flashing or liner, we quote the fix on the spot and often complete it the same visit. Call (855) 360-7080. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Commerce City Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Allison Gallagher"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Sarah Rhodes"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Rachel Norris